Home	Support \| Video Switches \| Mouse Holders \| USB Adaptors \| Cables \| Retail Store \| Resale \| About

Video Switches for Home Automation & Monitoring Applications

We offer a number of video switches based on our VS4T1 platform. Each addresses a specific market segment.. All switches are designed for NTSC/PAL composite video (like that used in CCTV, security cameras, TV Line In/Out, VCRs and camcorders).

Recycle your old TV
Dumping your old TV for the new digital broadcasts? Upgrading to HDTV? Don't toss your old TV set, re-use it as a Video Monitoring System. All you need is a TV with a Video-In jacks and a CamWatch4 or RSVSwitch and your video cameras.

VS4T1 Video Switch Platform
Small Form Factor

Industry Standard Jacks

Detachable Serial and Power

CamWatch4 - Video Sequencer

Sequentially displays video from up to 4 cameras on a single monitor/TV/capture card
No computer required to operate
Configurable for 2,3, or 4 cameras.
Easy configuration using onboard menu via any computer RS-232 serial port

XVideo10 - X10 Compatible Video Switch

Supports controlled switching of four cameras or other video sources via X10 protocol
Does not require X10 cameras - use standard security cameras or X10 cams.
Connects to standard monitor or capture card.
Compatible with any X10 controllers or automation software
Supports any house code (one per video switch)
No PC required for operation
Connects to the power lines via the X10 CM11A computer interface (not included)
Can be interfaced to home automation software, including X10 (programming may be required)
App Notes and Software on our website support pages
Works with any O/S or processor that supports RS-232 output. Tested on Windows, Mac, Linux, and PalmOS PDAs.

RSVSwitch - Advanced Video Control Switch

All the features of the CamWatch4 and more
Can operate as a standalone switcher in scan mode, or under direct software control for custom applications.
Control video switching directly from a computer
Scriptable, for custom software interfacing
Designed for compatiblity with home automation and motion detection systems.
Can monitor 3 relay sensors and switch on events
Event feedback option allows your software to monitor the switch and trigger changes as the video channels change.
Multiple baud rate support
Can be interfaced to home automation software, including X10 (programming may be required)
App Notes and Software on our website support pages
Programming examples for a variety of languages: PHP, Perl, C, VBScript, DOS, even PowerPoint!
Works with any O/S or processor that supports RS-232 output. Tested on Windows, Mac, Linux, and PalmOS PDAs.

View the Features Comparison Chart

OEM and Reseller Inquiries welcome.
To purchase directly, see our web store at www.twstore.com

Powered by WebRing.

VS4T1 Video Switch Platform Small Form Factor Industry Standard Jacks Detachable Serial and Power	CamWatch4 - Video Sequencer Sequentially displays video from up to 4 cameras on a single monitor/TV/capture card No computer required to operate Configurable for 2,3, or 4 cameras. Easy configuration using onboard menu via any computer RS-232 serial port
	XVideo10 - X10 Compatible Video Switch Supports controlled switching of four cameras or other video sources via X10 protocol Does not require X10 cameras - use standard security cameras or X10 cams. Connects to standard monitor or capture card. Compatible with any X10 controllers or automation software Supports any house code (one per video switch) No PC required for operation Connects to the power lines via the X10 CM11A computer interface (not included) Can be interfaced to home automation software, including X10 (programming may be required) App Notes and Software on our website support pages Works with any O/S or processor that supports RS-232 output. Tested on Windows, Mac, Linux, and PalmOS PDAs.
	RSVSwitch - Advanced Video Control Switch All the features of the CamWatch4 and more Can operate as a standalone switcher in scan mode, or under direct software control for custom applications. Control video switching directly from a computer Scriptable, for custom software interfacing Designed for compatiblity with home automation and motion detection systems. Can monitor 3 relay sensors and switch on events Event feedback option allows your software to monitor the switch and trigger changes as the video channels change. Multiple baud rate support Can be interfaced to home automation software, including X10 (programming may be required) App Notes and Software on our website support pages Programming examples for a variety of languages: PHP, Perl, C, VBScript, DOS, even PowerPoint! Works with any O/S or processor that supports RS-232 output. Tested on Windows, Mac, Linux, and PalmOS PDAs.